Kimble County Airport (JCT) is a public airport near Junction, Texas, owned and operated by Kimble County. It sits beside Interstate 10, making it a local aviation access point for Junction rather than one of the larger regional airports.
- Address: 635 Airport Road, Junction, TX 76849
- Road connections: Interstate 10 and U.S. Highways 83 and 377 serve Junction
- Access: the airport is open to the public
Where Kimble County Airport Is
Kimble County Airport is just outside Junction, immediately north of and adjacent to Interstate 10. The Texas Department of Transportation directory gives its address as 635 Airport Road, Junction, TX 76849; the Kimble County Courthouse is at 501 Main Street.
From Sun Valley, a two-star motel, the airport is about a 17-minute drive. Junction is served by Interstate 10 and U.S. Highways 83 and 377, so these are the main highway connections to keep in mind as you plan your approach.
What to Check Before Traveling
Confirm the arrangements for your specific flight before you set out, since the airport’s public status does not establish that scheduled airline service is available. Check the Texas Department of Transportation’s official site before you go for current airport details.
If you are flying your own aircraft, verify operational information directly before departure, including fuel availability, services, runway details and contact information. Airport facilities and operating details can change, so avoid relying on an old directory entry for a flight-critical decision.
Ground Transport and the Drive into Junction
Interstate 10 runs alongside the airport, and Junction connects to U.S. Highways 83 and 377. Use the airport’s street address to set your destination, then follow your chosen route into town.
For a broader picture of local roads and how the town fits together, read how to get around Junction. Food and lodging are about 1 mile from the airport, according to the TxDOT directory.
Airport Access and Services
Kimble County Airport is a county-owned public-use airfield, not a controlled commercial terminal. A Texas state filing describes it as the only public airport in Kimble County and notes that it serves locally based and stopover aircraft with hangar space, aviation fuel, jet fuel and related services.
The same filing describes a 5,000-foot paved runway and says flight approaches pass over Interstate 10 into Junction. For pilots, that setting makes it especially important to confirm current operating details and plan using authoritative aviation information.
Planning the Last Leg of Your Trip
Use Junction as your reference point when arranging the final leg, whether you are arriving by road or coordinating with someone flying into the airport. The airport’s location beside Interstate 10 puts it close to the town’s highway network, while its Airport Road address helps distinguish it from other regional airports.
If you are connecting an airport arrival with a drive around town, settle the pickup or onward transport plan before you travel. The airport is open to the public, but that does not by itself confirm that a rental car, shuttle or other ground service will be available when you arrive.
FAQs
What is the airport code for Kimble County Airport?
Its identifier is JCT.
Is Kimble County Airport open to the public?
Yes. It is a public airport owned and operated by Kimble County.
What is the airport’s address?
It is at 635 Airport Road, Junction, TX 76849.
Is Kimble County Airport beside Interstate 10?
Yes. The airport lies immediately north of and adjacent to Interstate 10.